Group hoist (ultra-low-speed electric hoist) is a low-speed chain electric hoist with light weight, simple installation, flexible operation control, and convenient use.
Group hoist
Group hoisting hoists are mainly suitable for the overall lifting of external wall scaffolding during the construction of high-rise buildings, group lifting of oil tanks for oil field production, and other occasions that require group lifting operations.
Group hoist detailed parameters
model | DHP1 | DHP2 | DHP3 | DHP5 | DHP10 |
Rated lifting capacity | 1T | 2T | 3T | 5T | 10T |
Test load | 1.25T | 2.5T | 3.75T | 6.25T | 12.5T |
Lifting speed | 0.26m / min 0.09m / min | 0.26m / min 0.09m / min | 0.26m / min 0.09m / min | 0.26m / min 0.09m / min | 0.26m / min 0.09m / min |
Minimum distance between two hooks mm | 300 | 380 | 470 | 600 | 730 |
Standard lifting height | 3 M | | | | |
Motor Power | 0.5KW | 0.8KW | 1.1KW | 1.5KW | 0.8KW |
voltage | 380V 50HZ | | | | |
Total Weight | 42Kg | 50Kg | 55Kg | 62Kg | 120Kg |
Every additional meter adds weight | 0.82Kg | 1.7 Kg | 2.9Kg | 4.42Kg | 8.84 Kg |
1. In use, it is absolutely forbidden to use in the environment that is not allowed, and under the rated load and the rated closing times per hour (120 times).
2. It is not allowed to press two flashlight button buttons that move the electric hoist in opposite directions at the same time.
3. After the work is completed, the main gate of the power supply must be opened to cut off the power supply.
4. It should be operated by a special person. The operator should fully grasp the safety operation regulations.
5. In use, the electric hoist must be inspected regularly by specialized personnel, and measures should be taken in time to find faults, and carefully recorded.
6. Adequate lubricant must be maintained during use, and the lubricant must be kept clean and free of impurities and dirt.
7. The steel wire rope should be oiled with a hard brush or a small piece of wood. It is strictly forbidden to directly oil the wire rope at work by hand.
8. When the hoist is not working, it is not allowed to suspend heavy objects in the air to prevent permanent deformation of the parts.
9. During use, if a fault is found, immediately cut off the main power.
10. Pay special attention to the wearing parts during use. Therefore it is called "group hoist (ultra-low speed electric hoist)".
